Lighting Solutions – Using a 220V Rated LED Lamp on a 110V Line

Key difference:

• Halogen lights generally run from AC so this is what your transformer outputs.

• LED's require DC so generally yes, you will need a rectified output from your transformer.

I am guessing the transformer is providing enough forward voltage on initial switch-on, but not thereafter.

You may be able to add a rectifier circuit at each bulb location to cope with this.

It makes sense - look for "low voltage LED Lighting" to see what's available, or slide on over to Electronics to build your own.

Dimmable LED bulbs are those with drivers built-in that are "dimmable" - if just running controlled current to LEDs, they are all "Dimmable" (lower current, lower light) so, no, you don't want an LED described as "Dimmable" (nor one described as 12V, probably - a "bare" LED with no other parts attached is best when you are going to feed it controlled current.) If you purchase a "12V dimmer" pre-made, follow the dimmer-maker's suggestions on types of LEDs to attach to it.

LEDs are current devices, so controlling the current will give highly consistent light output (controlling the voltage, less so)