I have a 2×6 header for a window in a remodel with approx 5" long cripples between the header and top plate. What is the preferred nailing schedule for the attaching the cripple studs to the top plate and header per the IRC? Its obviously a little tight and I'd prefer just to toenail 2 8D common nails if possible (one into the header and the other into the top plate)
Recommened nailing schedue for cripple studs between header and top plate
framingwindows
Related Topic
- Framing in a header. Can I toenail from each side
- Do I need to use cripple studs if header is tight to the top plate
- Splicing wall plates at doors and windows
- Should window headers be set against the top plate or at rough opening height
- Walls – What are the steps to raising an interior wall header
- Installing windows – screws laterally into studs vs nailing flange
Best Answer
If you can nail down through the top plate (e.g. before the second top plate is installed) then 3 12d nails is standard for 2x6 framing. For nailing the cripple into the header, toenailing should be fine, but I'd use 12d glue coated framing nails (greenish nails). Save the 8d nails for attaching sheathing.
Note, this is just personal experience, your local codes may require otherwise. It doesn't hurt to ask your building inspector what they require.