Old house with double-glazed replacement window. I had to have one of the glass panes replaced and was able to easily tilt in the window and remove the lower unit. Upon replacement, the window goes right in, I cannot slide it down and when I slide it up, it pulls out of the support springs in both tracks. I feel as though something is holding the spring in the current position. As if it is locked there. What am I missing?
Replacement window spring won’t raise
replacementwindows
Related Topic
- What are the pros and cons of sash vs. tilt and turn windows
- Doors – Why is a steel security door safe if they can break the glass, slide their hand in, and unlock the door
- Blind stop for replacement window in rough opening
- If it is important to humidify the air in winter for one’s health, how then do you prevent condensation from forming on the inside of windows
- Help recognize / how to remove and reinstall this window
Best Answer
In looking closer at the window it appears the posts that engage the spring supports are keyed and when you rotate the window back in place the spring support is unlocked. Of course on my windows the locks are going bad...