Splicing a 25 pair telephone riser

telephone

I have a phone riser in my apartment (25 copper pair, originally but only 18 left going past my floor) carrying Verizon phone service.

I have to move it over 3' to a different wall, so that means splicing in a new segment, a "bridge", which goes under the floor to a different wall up that wall into the ceiling and back to the place in the ceiling where the riser exits. Verizon won't be doing this work because they want $6000 to do it (and even at that price it will take 8 to 10 weeks to get done).

I have a 25 pair 22 awg plenum and I'm going to get some 3G UR2 to make each of the 72 connections. (18 pair x 2 wire x 2 splice locations).

I have a few questions (is that allowed)?

1) I can't tell if the existing wiring (probably installed at lest 30 years ago) is 22 AWG or 24 AWG. Will there be any problem if I use 22 AWG and the existing wire is 24? Some tenants above me may be using DSL of course.

2) If I use the UR2, I have to cut each conductor and then crimp the two connections – this means the circuit will be dead momentarily. Alternatively, I could use a double run/tap connector and connect the entire "bridge" section first then cut the middle out. So there are two questions here:
a) Is this kind of connection "as good" as the UR2 which has the gel inside? I really don't want to cause service problems and have Verizon poking around. and b) once I complete the bridge but before I cut the short piece out there will be two "paths" for each conductor. Will this cause problems while the job is in progress?

Best Answer

Firstly, I don't know what your specific situation is, but it sounds like what you're trying to do might be illegal. You're potentially messing with people's emergency services (911 access) and Verizon might own the cable you're trying to mess with. But, I'll assume you've worked this out somehow, and take no responsibility for your actions.

I used to work on telecom and have done cutovers on live copper. It's easy; much easier, but dirtier, than fiber.

Moving to a larger gauge wire is not ideal, mainly because splicing it together could be less reliable (the UR2 is designed for the same gauge wire), but otherwise will not cause any issues.

Using a temporary connection while cutting over is standard practice. We used some vampire clip jumpers (AKA ABN (Angled Bed-of-Nails) clips) to make a temporary bridge, cut out the old, made a new splice in the middle. The gel inside the UR2 (icky-pic) is to keep water out, not act as a conductor, so the vampire clips are just as good in the temporary situation. If someone is talking on the phone during the cutover they will probably hear something, but should not be too disrupted.

I encourage you to check the law on this. If you don't have permission and licensing then even if you're not caught in the act and Verizon later finds out someone illegally performed the exact thing you already got a quote for... Well, it's still illegal and they have a damn good idea who did it.

Related Topic