Im making this for my kids. I will post the video so you guys can watch it, and have an idea what im talking about. Just watch the video until minute 2:50 because thats all im doing. The rest will be different from the video..just want to know how much weight can i put on? And what nails or screws to use..? Any help please. Thanks in advance.
Wood – What nails or screws to use to support 600 pounds max? Making tree house bed
nailsscrewswood
Related Topic
- Bathroom subfloor replacement
- Rebuilding an exterior deck is it better to use screws or nails
- Wood – Replacing a cabinet face
- Walls – Installing pull-up bars. Will this design hold
- Plumbing – Plaster identification and screw recommendation
- Water – Deck Posts Were Covered With Dirt, Dealing With Rot
- Wall-to-wall desk with battens
Best Answer
Common 3-1/2" gold construction screws (of good quality) are good for 50# or more each when used in solid lumber and penetration is at least 1-1/2". Dividing your bed into two ends, you'll need 6 screws per end to hit your load rating. Considering that you'll probably anchor it along the side as well, you'll have more than adequate support.
Do not use nails for anything that's not intended to be permanent, nor for anything where pullout resistance is critical.
Disclaimer: This assessment is based on several decades of construction and home ownership experience, and not any particular specification or product rating.